Natural Flagstone

Natural bed flagstone is one of our most popular materials. The irregularly-shaped stones can create patios, walkways, stepping stones, out line ponds. Furthermore, it can be stacked to make a wall, or be used as edging.

The uses for flagstone are virtually endless. You can even use flagstone in the interior of your home for a bold and truly unique look.

We have three different thicknesses available - 1", 2" & 3". The pieces will all vary in thickness because they are a natural product.

The 2" thickness is also available in pallet size, which means that the flagstone pieces are typically bigger than the pallet.

Chilton

natural flagstone

Chilton Flagstone is full of a combination of lilacs, grays, blues, rust and golden browns.  This variety of natural stone will add a bold dash of color to your landscape project.

While the colors may vary because of the natural state of the product, the smooth and consistent surface of Chilton works well with areas prone to are feet in residential applications

Chilton Flagstone comes in various sizes to lend itself to any outdoor living project.

Coverage: 80‐100 sq.ft. per ton
Sizes: 16‐42” in diameter
Thickness: 1”‐1.5”. 2” and 2.5” +/‐

Eden

Natural flagstone

Known for its quality, consistency and beauty, Eden Flagstone is our most popular product. Sorted and fabricated from the best layers of high density limestone available, Eden material is the perfect paving for any application.

In shades of cool gray to buff, the smooth texture and low rate of heat absorption is easy on bare feet.

It is easy to see why Eden flagstone is one of volume products.

Coverage: 80‐100 sq.ft. per ton
Sizes: 16‐42” in diameter
Thickness: 1”‐1.5”. 2” and 2.5” +/‐

Mountain Crest

MountainCrestFS

Mountain Crest Flagstone is the rugged brother to our famous smooth Eden Flagstone. Similar to Eden, Mountain Crest offers the same straight lines and large pieces. Its
color varies from medium to deep gray with some hints of buff.

The perfect choice for high traffic or commercial landscape paving projects where traction is essential, Mountain Crest’s bedface surface texture is coarse and pimpled to grip wet shoes and areas prone to moss.

Coverage: 80‐100 sq.ft. per ton
Sizes: 16‐42” in diameter
Thickness: 1”‐1.5”. 2” and 2.5” +/‐

Dimensional

Dimensional FS

Add subtle texture, shape and pattern while achieving a smooth modern look with the pre-cut pattern of Dimensional Flagstone patio pavers.

These pavers offer the look of a custom cut, or milled flagstone patio, with less waste and easier installation.

  • Authentic, natural, slate texture
  • Refined textures and shapes are perfect for natural or formal settings
  • 6 unique shapes and 25 unique stone textures
  • Large unit sizes allow the product to be used in large patios without looking busy, a common downfall of smaller bricks
  • Uniform thickness makes the top surface of patios and walkways even and safe

Bluestone

BluestoneFS

Bluestone has a soft yellow/tan hue and thus, a local favorite in Des Moines.  Bluestone has a very earthy look, perfect for backyard projects. This product also works well for patios and pathways.

To ensure consistent thickness, Bluestone manufacturers saw both the tops and bottoms of the stones.

Full Color Irregular

Full Color Irregular FS

Full color irregular – Natural Cleft surface top & bottom, Natural ,snapped or broken edge , selected for thickness tolerances listed below . Sound material in irregular shapes 2 sq.ft. up to 6 sq.ft. per piece.

Size & Color Options:

1/2″ runs 3/8″ – 3/4″
1″ runs 3/4″ – 1-1/4″
1-1/2″ runs 1 1/4″ – 2-1/4″
2-1/2″ runs 2-1/4″ – 4″

Blue Natural Cleft

BlueCleftFS

All sizes are nominal 1/2″ Under size. Standard specifications are as follows :

From 12″ x 12″ up to 36″ x 36″
1/2″ runs 3/8″ – 3/4″
1″ runs 3/4″ – 1 1/4″
1 1/2″ runs 1 1/4″ – 2 1/4″
2 1/2″ runs 2 1/4″ – 4″

Bluestone NC Pattern

Bluestone Pattern FS

All Bluestone NC pattern sizes are nominal 1/2″ Under size. Standard specifications are as follows:

From 12″ x 12″ up to 36″ x 36″
1/2″ runs 3/8″ – 3/4″
1″ runs 3/4″ – 1 1/4″
1 1/2″ runs 1 1/4″ – 2 1/4″
2 1/2″ runs 2 1/4″ – 4″

Green Select Natural Cleft Pattern

GreenSelectFS

All green select natural pattern sizes are nominal 1/2″ Under size. Standard specifications are as follows :

From 12″ x 12″ up to 36″ x 36″
1/2″ runs 3/8″ – 3/4″
1″ runs 3/4″ – 1 1/4″
1 1/2″ runs 1 1/4″ – 2 1/4″
2 1/2″ runs 2 1/4″ – 4″